Thanks,
During those 2 weeks, we got half a meter of snow in 2 days, then it went below -20C for about 3 days.
The SB-22 flashes were to my surprise still in standby (with standard AA Eneloop...
Type: Posts; User: KennethW
Thanks,
During those 2 weeks, we got half a meter of snow in 2 days, then it went below -20C for about 3 days.
The SB-22 flashes were to my surprise still in standby (with standard AA Eneloop...
I have had a break in my DSLR trapping for about a year. During the 2 weeks it was out, an old friend stopped by to say hello to the camera.
Being a little rusty, i placed the flashes little too...
I use Youngnuo RF 603 II wireless triggers since one and a half year. No issues other than the short battery life without extending it somehow. I soldered a connector to i so i now have several weeks...
Interesting project, i am going to follow this.
I have had a camera trap out in Southern coast of Finland for a little more than a year. PIR has its good and bad sides. I use a light barrier in...
I wanted to try an other approach to my pictures to see how they turn out.
I use 2-3 SB-28 in electrical housings. Diffusion is made by air filter sheets in the transparent enclosure covers.
It...
The surface is a bridge for animals over a small stream of water, actually an old container door. The wooden stick that holds the AIR sender is a little too visible still (continuous prototyping).
A raccoon dog got caught using a light barrier (AIR)
Nikon D3200 2x SB-28
Hi,
I use Yognuo RF 603II for my 2-3 SB-28 flash setup. Nikon D200 / D3200
There the flash comes immediately upon the first frame. I modified the 603's to take bigger batteries for longer...
Nikon D3200 1/250s iso 800 Nikon 18-70 at 18mm f8 focus at 1m 2x SB-28 with diffusors
A low positioned camera gives interesting presence.
Nikon D200, 18-70 at 18mm f8 1/200s iso 200 2x SB 28 at 1/2 power at both sides and above the camera.
Trigger a cheap sub 4€ PIR. Signal via a...
This i have in test at then moment. I also have an other brand waiting for some testing. I connect it directly to the camera using the NPN output.
I think i could have the beam higher up for the...
I tested an industrial through beam AIR system last week. Here is the first image, from that.
I was bold enough to thrust the object to be where the beam would catch and used f5 at 18mm, but did not...
Camtrapping is not always that easy :)
41
Nikon D200, 18mm 3x sb-28 flashes
The snow starts to pile up in the lens pipe.
Nikon D200, 18mm 2x sb 28 at 1/4 power
Nikon D200, 18-70 Kit lens at 18mm, 3xSB-28
Triggered by a sub 4€ PIR home brew electronics.